From: "Hoonpongsimanont
Date: Wed Nov 10 2004 - 11:26:40 GMT-3
Hi,
Many thanks to you. :-)
Interface Se0/0.35
Access Target Byte Sustain Excess Interval Increment Adapt
VC List Rate Limit bits/int bits/int (ms) (bytes)
Active
503 768000 10000 80007 0 104 9984 -
Interface Se0/0.35
Access Target Byte Sustain Excess Interval Increment Adapt
VC List Rate Limit bits/int bits/int (ms) (bytes)
Active
503 768000 5000 80008 0 52 4992 -
This is interesting. Looks like if byte limit is more than 10000, router
will divide things by two.
Cheers,
David
-----Original Message-----
From: Tiean [mailto:noktes@bellsouth.net]
Sent: Wednesday, November 10, 2004 9:19 PM
To: Hoonpongsimanont, Chalermchai; Nico van Niekerk; 'Group Study'
Subject: Re: FR Traffic Shaping Tc
Can you try this? Change Bc to 80007 and 80008. And compare the Byte limit
output. I guess that as long as the byte limit is not more than 10000 so it
uses your parameter to calculate Tc. But I don't know why either.
Tiean
----- Original Message -----
From: "Hoonpongsimanont, Chalermchai"
<chalermchai.hoonpongsimanont@atosorigin.com>
To: "Nico van Niekerk" <nico@vanniekerk.co.za>; "'Group Study'"
<ccielab@groupstudy.com>
Sent: Wednesday, November 10, 2004 8:50 AM
Subject: RE: FR Traffic Shaping Tc
> Nothing has changed. I tried fragment 1500, and 960.
>
> -----Original Message-----
> From: Nico van Niekerk [mailto:nico@vanniekerk.co.za]
> Sent: Wednesday, November 10, 2004 8:40 PM
> To: Hoonpongsimanont, Chalermchai; 'Group Study'
> Subject: RE: FR Traffic Shaping Tc
>
> What happens if you put a "frame-relay fragment" under the R3R5 map-class?
>
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> > Nico van Niekerk
> > Sent: Thursday, 11 November 2004 12:22 AM
> > To: Hoonpongsimanont, Chalermchai; 'Group Study'
> > Subject: RE: FR Traffic Shaping Tc
> >
> >
> > I don't know why your Byte Limit is 6048, but if you take 6048*8 /
768000
> > you get the Bc of 63ms.
> >
> > > -----Original Message-----
> > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> > > Hoonpongsimanont, Chalermchai
> > > Sent: Wednesday, 10 November 2004 6:23 PM
> > > To: 'Group Study'
> > > Subject: FR Traffic Shaping Tc
> > >
> > >
> > > Hi all,
> > >
> > > I am confused with Frame Relay Traffic Shaping Tc interval. I
> > think router
> > > will automatically calculate Tc from configured CIR and Bc by
> > >
> > > Bc = CIR * Tc
> > >
> > > This is not working as expected on my router.
> > >
> > > Rack1R5#show traffic-shape serial0/0.35
> > >
> > > Interface Se0/0.35
> > > Access Target Byte Sustain Excess Interval
> > > Increment Adapt
> > > VC List Rate Limit bits/int bits/int (ms) (bytes)
> > > Active
> > > 503 768000 6048 96000 0 63 6048
> > > -
> > >
> > > I configured target rate of 768000, Bc of 96000, therefore I
> > > expected to see
> > > Tc of 96000/768000 = 1/8 second = 125 ms. But on my router, Tc is 64
ms.
> > >
> > > It's working fine on another subinterface.
> > >
> > >
> > > Rack1R5#show traffic-shape serial0/0.54
> > >
> > > Interface Se0/0.54
> > > Access Target Byte Sustain Excess Interval
> > > Increment Adapt
> > > VC List Rate Limit bits/int bits/int (ms) (bytes)
> > > Active
> > > 504 768000 960 7680 0 10
960 -
> > >
> > > Could this be a software bug? I'm using 12.2(15)T14.
> > > Thanks in advance,
> > >
> > > Cheers,
> > > David
> > >
> > > Here's configuration.
> > >
> > > !
> > > class-map match-all voice
> > > match dscp cs5
> > > !
> > > !
> > > policy-map voice-go-first
> > > class voice
> > > priority 256
> > > class class-default
> > > fair-queue
> > > policy-map mark-default
> > > class class-default
> > > set dscp cs1
> > > !
> > > !
> > > interface Serial0/0
> > > no ip address
> > > encapsulation frame-relay
> > > frame-relay traffic-shaping
> > > no frame-relay inverse-arp
> > > !
> > > interface Serial0/0.35 point-to-point
> > > ip address 163.1.35.5 255.255.255.0
> > > ip router isis
> > > isis circuit-type level-2-only
> > > frame-relay interface-dlci 503
> > > class R3R5
> > > !
> > > interface Serial0/0.54 point-to-point
> > > ip address 163.1.54.5 255.255.255.0
> > > ip router isis
> > > ip pim dense-mode
> > > backup interface BRI0/0
> > > isis circuit-type level-2-only
> > > frame-relay de-group 1 504
> > > frame-relay interface-dlci 504
> > > class R4R5
> > > !
> > > !
> > > map-class frame-relay R4R5
> > > frame-relay end-to-end keepalive mode request
> > > frame-relay cir 768000
> > > frame-relay bc 7680
> > > frame-relay be 0
> > > service-policy output voice-go-first
> > > frame-relay fragment 960
> > > !
> > > map-class frame-relay R3R5
> > > frame-relay cir 768000
> > > frame-relay bc 96000
> > > frame-relay be 0
> > > service-policy input mark-default
> > >
> > >
This archive was generated by hypermail 2.1.4 : Thu Dec 02 2004 - 06:57:41 GMT-3