From: Swaroop Potdar (swarooppotdar@hotmail.com)
Date: Wed Nov 10 2004 - 03:42:29 GMT-3
Hi,
If what i understand is correct....
you have enabled authentication on either of the ospf areas and are trying
to use a virtual link to bridge btwn two broken area 0 then u dont need to
use any authentication on the virtual link as implied.
If its asked for that the virtual link be authenticated then only you should
use virtual link authentication ( which is available in the virtual command
arguments)
Swaroop.
>From: inlink <inlink@klsc.co.kr>
>Reply-To: inlink <inlink@klsc.co.kr>
>To: ccielab@groupstudy.com
>Subject: ospf area0 authenticaion - virtual link
>Date: Wed, 10 Nov 2004 13:21:39 +0900
>
>Hi
>area0 - md5 authentication
>area1 - clear text authenticaion
>
>What kind of method does used to virutal link area ?
>I am test both method( md5, clear text) about virtual link.
>
>I am confused to virtual-link authenticaion.( area0 method or sub area
>method)? [IMAGE]
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
Regards,
Swaroop.
------------------------------------------------------------------
Life Is Short & Sweet.
Live It To The Fullest.
------------------------------------------------------------------
This archive was generated by hypermail 2.1.4 : Thu Dec 02 2004 - 06:57:41 GMT-3