From: Perez, Martín (perezm@metrored.com.ar)
Date: Sat Nov 06 2004 - 17:52:52 GMT-3
-----Original Message-----
From: Cisco certification
To: perezm@metrored.com.ar
Sent: 11/6/04 5:49 PM
Subject: Please confirm (conf#311b5e689540e771b25926a27ddf6692)
Hi,
You have tried to post to a GroupStudy.com certification mailing list.
Because
the server does not recognize you as a confirmed poster, you will be
required
to authenticate that you are using a valid e-mail address and are not a
spammer. By confirming this e-mail you certify that you are not sending
Unsolicited Bulk Email (UBE).
PLEASE DO NOT SEND YOUR ORIGINAL MESSAGE AGAIN! BY CONFIRMING THIS
EMAIL
YOUR ORIGINAL MESSAGE (WHICH IS NOW QUEUED IN THE SERVER) WILL BE
POSTED.
By confirming this e-mail you also certify the following:
1. The message does NOT break Cisco's Non-Disclosure requirements.
2. The message is NOT designed to advertise a commercial product.
3. You understand all postings become property of GroupStudy.com
4. You have searched the archives prior to posting.
5. The message is NOT inflammatory.
6. The message is NOT a test message.
To confirm, simply reply to this message. No editing is necessary.
Once
confirmed, you will be able to post without additional confirmations.
Welcome to GroupStudy.com!
First time posters to GroupStudy.com are required to agree to the
GroupStudy terms and conditions.
Replying to this email, certifies you have read and agree to the
GroupStudy posting guidelines and terms and conditions.
--- Original Message Follows ---
From: =?iso-8859-1?Q?=22Perez=2C_Mart=EDn=22?= <perezm@metrored.com.ar>
To: "'ccielab@groupstudy.com'" <ccielab@groupstudy.com>
Subject: DLSW+ question
Date: Sat, 6 Nov 2004 17:47:07 -0300
Does anybody understand the "cluster" configuration in a remore-peer
sentence in a Border router ?
The documentation says something like "When the user configures the
cluster option in the dlsw remote-peer command on a border peer,
they enable the DLSw+ Peer Clusters feature without forcing every DLSw+
router in the network to upgrade their software."
What does it means ? How it really works ?
Regards
Martmn
This archive was generated by hypermail 2.1.4 : Thu Dec 02 2004 - 06:57:40 GMT-3