Re: Multicast question

From: Hai Minh (minh@ipmac.com.vn)
Date: Mon Nov 08 2004 - 06:08:04 GMT-3


Tim,

Yes, it's "ip igmp access-group" command.

Thanks for your explaination, but I'm confuse why does the command "ip
multicast boundary" consider the address as destination address.

HTH
Hai Minh

----- Original Message -----
From: "ccie2be" <ccie2be@nyc.rr.com>
To: "Hai Minh" <minh@ipmac.com.vn>; <ccielab@groupstudy.com>
Sent: Monday, November 08, 2004 10:47 AM
Subject: Re: Multicast question

> Are you sure there is a command, ip multicast access-group. I looked for
it
> but came up empty, however, there is a command, ip igmp access-group which
> is used to prevent joins.
>
> Now, this might be obvious to lots of people, but I didn't notice this
until
> it was explicitly pointed out to me, I think by Scott Morris.
>
> When the ip multicast boundary # command is used, it's referencing an acl
> just like the command, ip access-group #, so I wondered why was the ip
> multcast boundary command needed. Isn't the ip access-group sufficient to
> do the job?
>
> The answer, of course, is it isn't. This is because when the ip
> access-group # command is used, it interprets the ip addresses in the acl
as
> source ip addresses. With the command, ip multicast boundary #, the ip
> addresses referenced by the acl are interpreted as destination addresses.
>
> A minor point, no doubt, but it highlights how important it is to pay
> attention to details.
>
> HTH, Tim
>
>
> ----- Original Message -----
> From: "Hai Minh" <minh@ipmac.com.vn>
> To: <ccielab@groupstudy.com>
> Sent: Saturday, November 06, 2004 11:35 PM
> Subject: Multicast question
>
>
> > Hi group,
> >
> > I have this configuration. What is the different between the command "ip
> > multicast boundary" and "ip multicast access-group" in this case ? I
think
> > both of them are used to block the hosts to join to the multicast group
> > 226.26.26.26.
> >
> > Could someone please explain to me ?
> >
> > Thanks in advance
> >
> > ================
> > R1
> > interface E0/0
> > ip multicast boundary 1
> >
> > interface E0/1
> > ip multicast access-group 1
> >
> > access-list 1 deny 226.26.26.26
> > access-list 1 permit any
> > =======================
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html



This archive was generated by hypermail 2.1.4 : Thu Dec 02 2004 - 06:57:40 GMT-3