From: Edwards, Andrew M (andrew.m.edwards@boeing.com)
Date: Fri Nov 05 2004 - 18:09:18 GMT-3
Close. Permit "even" routes
Permit 0.0.2.0 255.255.254.255
andy
-----Original Message-----
From: Lee Gillespie [mailto:gillespie_ccie@yahoo.com]
Sent: Friday, November 05, 2004 12:52 PM
To: Cisco Net; Group Study
Subject: Re: Even routes and metric of 10 in RIP
I think your permit statement needs to look like this:
permit 0.0.0.0 255.255.254.255
--- Cisco Net <network.cisco@gmail.com> wrote:
> Hi
> From my neighbor i am getting a lot of rip routes
> from my neighbor router.
>
> My objective is to allow only even routes that match
> the 3rd octet.
> and
> I should also see a metric of 10 in my routing table
>
> now can i do this,
> ip access-list standard INCOME
> permit 0.0.1.0 0.0.254.0
>
> router rip
> version 2
> passive-interface default
> no passive-interface Ethernet0/0
> offset-list INCOME in 9 Ethernet0/0 ----> Watch
> this
> network 10.0.0.0
> distribute-list INCOME in Ethernet0/0 ---> Watch
> this
> distribute-list name in
> no auto-summary
>
>
> "router rip" having both distribute list and off-set
> list for the same
> routes...
> Does it work and Is this a good solution
> Regds
> Cert
>
>
This archive was generated by hypermail 2.1.4 : Thu Dec 02 2004 - 06:57:38 GMT-3