From: Sheahan, John (John.Sheahan@priceline.com)
Date: Fri Nov 05 2004 - 13:19:48 GMT-3
show ip interface <interface #>
will specifically show if split horizon is enabled or disabled
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Georg Pauwen
Sent: Friday, November 05, 2004 5:39 AM
To: network.cisco@gmail.com; ccielab@groupstudy.com
Subject: RE: Split horizon for eigrp ???
Hello,
since EIGRP Split-Horizon is on by default, you will only see it if it is
turned off on an interface with the interface command <no ip split-horizon
eigrp x> command. If you do a <sh run> and do not see <no ip eirgp
split-horizon eigrp x> command on the respective interface, it means that
split-horizon is turned on.
Regards,
Georg
>From: Cisco Net <network.cisco@gmail.com>
>Reply-To: Cisco Net <network.cisco@gmail.com>
>To: Group Study <ccielab@groupstudy.com>
>Subject: Split horizon for eigrp ???
>Date: Thu, 4 Nov 2004 19:08:24 -0800
>
>Hi
>
>How to see if i have disabled or enabled the split horizon for eigrp
>on a given interface. I can not see on sh ip protocol.. Any other way
>?
>Thx
>Cert
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Dec 02 2004 - 06:57:38 GMT-3