RE: How does VTP

From: Karl Young (kaelwyoung@netscape.net)
Date: Thu Oct 28 2004 - 12:50:36 GMT-3


Duane,
      I am assumng that the layer 3 switch is passing traffic otherwise vlans 2 3 4 5 6 and 7 would be useless.None means no more configuation is nesssary.If the trunks are up I can safely assume that the layer 3 device is already configured.Is it up Jacque ?
                                    Regards,
                                    Karl.

    anything "De Witt, Duane" <duane.dewitt@siemens.com> wrote:

>If the layer 3 switch doesn't have any vlans configured how is it going to route the traffic?
>
>Regards
>Duane
>
>-----Original Message-----
>From: Karl Young [mailto:kaelwyoung@netscape.net]
>Sent: Thursday, October 28, 2004 5:04 PM
>To: De Witt, Duane; "jacque vincent"; ccielab@groupstudy.com
>Subject: RE: How does VTP mode transparent work with trunking ?
>
>Jacque,
> The answer is none , no vlans are necessary , because you are Trunking between each switch.
> Regards,
> Karl.
>
>"De Witt, Duane" <duane.dewitt@siemens.com> wrote:
>
>>Hi
>>
>>VTP has nothing to do with connectivity, it is merely an easy way to
>>propagate your vlan config throughout the network.
>>
>>In your case you would need VLAN 2,3,4,5,6 and 7 on your L3 switch and
>>enable routing between them and the VLAN your servers are on.
>>
>>Regards
>>Duane
>>-----Original Message-----
>>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
>>jacque vincent
>>Sent: Wednesday, October 27, 2004 10:28 PM
>>To: ccielab@groupstudy.com
>>Subject: How does VTP mode transparent work with trunking ?
>>
>>Hi
>>
>>3 switches connected in a row to a core switch at the main site.
>>I am trunking between switches. I am only routing at the core switch.
>>
>>switch1------switch2-----switch3------switch4(L3)
>>
>>Switch1 Vlans 2 & 3
>>Switch2 Vlans 4 & 5
>>Switch3 Vlans 6 & 7
>>switch4 is L3
>>
>>
>>All switches are in VTP mode transparent.
>>
>>There are users connected to each one of the switch and the servers at
>>the
>>core switch.
>>What VLANs do I need to create in the core switch so that the users
>>connected to switches 1 & 2 to be able to access servers at the main
>>site ?
>>
>>_________________________________________________________________
>>Powerful Parental Controls Let your child discover the best the Internet
>>has
>>to offer.
>>http://join.msn.com/?pgmarket=en-ca&page=byoa/prem&xAPID=1994&DI=1034&SU
>>=http://hotmail.com/enca&HL=Market_MSNIS_Taglines
>> Start enjoying all the benefits of MSN. Premium right now and get the
>>first two months FREE*.
>>
>>_______________________________________________________________________
>>Subscription information may be found at:
>>http://www.groupstudy.com/list/CCIELab.html
>>
>>_______________________________________________________________________
>>Subscription information may be found at:
>>http://www.groupstudy.com/list/CCIELab.html
>>
>
>__________________________________________________________________
>Switch to Netscape Internet Service.
>As low as $9.95 a month -- Sign up today at http://isp.netscape.com/register
>
>Netscape. Just the Net You Need.
>
>New! Netscape Toolbar for Internet Explorer
>Search from anywhere on the Web and block those annoying pop-ups.
>Download now at http://channels.netscape.com/ns/search/install.jsp
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
>



This archive was generated by hypermail 2.1.4 : Sat Nov 06 2004 - 17:11:54 GMT-3