From: John Matus (jmatus@pacbell.net)
Date: Thu Oct 28 2004 - 02:16:14 GMT-3
now, a question that has come up is weather you have to specify a queue size
when you configure 'fair-queue'. from what i'm told the default queue size
is zero so unless you create queues the whole thing doesn't practically
work......
anyone care to comment on this?
Regards,
John D. Matus
MCSE, CCNP
Office: 818-782-2061
Cell: 818-430-8372
jmatus@pacbell.net
----- Original Message -----
From: "Cisco Net" <network.cisco@gmail.com>
To: "Group Study" <ccielab@groupstudy.com>
Sent: Wednesday, October 27, 2004 7:13 PM
Subject: WRED without fairq / cb-wfq ?
> Hi
> Is fairq or cb-wfq is a requirement for wred... ?
> So far i was thinking this is the requirement until somebody mentioned me
> it is not a requirement.So i am seeking help here to verify this..
>
> 1) Can i enable wred on an ethernet interface without changing the fifo to
> fairq
> queueing. I tried and it dows not complain but i am not whether i
> am doing right
> or wrong.
> 2) I know that in MQC i can enable on class-default. Also the default
> q is fair q here
> How about if i have a class with cbwfq (bandwith) and LLQ
> (priority). Can i use
> wred on these classes...
>
> Thank you for your help..
> Regards
> Cert
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Nov 06 2004 - 17:11:54 GMT-3