From: W Walla (wallafly@hotmail.com)
Date: Wed Oct 27 2004 - 18:19:51 GMT-3
I have checked out the hardware and it all seems fine: $print says it is
looking into my circuit for an answer?. What would any vlounteers venture
to say the problem is? Look after 1:16 minute, how many CRC/input errors
there are:
(remember, all harware has been checked by me)
Serial0 is up, line protocol is up
Hardware is PQUICC with Fractional T1 CSU/DSU
MTU 1500 bytes, BW 768 Kbit, DLY 20000 usec,
reliability 247/255, txload 72/255, rxload 60/255
Encapsulation FRAME-RELAY, loopback not set
Keepalive set (10 sec)
LMI enq sent 7, LMI stat recvd 7, LMI upd recvd 0, DTE LMI up
LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0
LMI DLCI 0 LMI type is ANSI Annex D frame relay DTE
Broadcast queue 0/64, broadcasts sent/dropped 1/0, interface broadcasts 0
Last input 00:00:00, output 00:00:00, output hang never
Last clearing of "show interface" counters 00:01:14
Input queue: 0/75/0 (size/max/drops); Total output drops: 0
Queueing strategy: weighted fair
Output queue: 0/1000/64/0 (size/max total/threshold/drops)
Conversations 0/68/256 (active/max active/max total)
Reserved Conversations 0/0 (allocated/max allocated)
5 minute input rate 183000 bits/sec, 83 packets/sec
5 minute output rate 219000 bits/sec, 277 packets/sec
5894 packets input, 1842672 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
1000 input errors, 730 CRC, 248 frame, 0 overrun, 0 ignored, 22 abort
20423 packets output, 1954442 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 output buffer failures, 0 output buffers swapped out
0 carrier transitions
DCD=up DSR=up DTR=up RTS=up CTS=up
This archive was generated by hypermail 2.1.4 : Sat Nov 06 2004 - 17:11:53 GMT-3