From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Wed Oct 27 2004 - 10:46:04 GMT-3
Which interfaces are you referring to? Check the task 7.1 - 7.2
solution and see if it is enabled there.
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> ccie Meftahi
> Sent: Wednesday, October 27, 2004 3:22 AM
> To: ccielab@groupstudy.com
> Subject: IE lab 8 tak 7.8-7.9
>
> Hi group
>
> Is pim missing under interfaces from this solution ?
> My study partnet and I tested it, and dense was required to steram
frpm
> one PC top the other.
>
> Figure 71 in CD clearly uses pim dense mode
>
>
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/
fi
> pr_c/ipcpt3/1cfmulti.htm#41833
>
> Thought ?
>
> TIA
>
> Sam
>
>
> ---------------------------------
> ALL-NEW Yahoo! Messenger - all new features - even more fun!
>
>
This archive was generated by hypermail 2.1.4 : Sat Nov 06 2004 - 17:11:53 GMT-3