From: AdebolaA@mtnnigeria.net
Date: Tue Oct 26 2004 - 07:02:17 GMT-3
Hi Steve,
From your post I interpret the question to mean "make sure the EIGRP process
advertises the 3725 E0 interface (include it in the EIGRP topology), but
this must be done without generating EIGRP packets and must not be
accomplished with passive-interface command)".
I see this requirement being met by redistributing connected and controlling
redistributed interfaces with a route-map to limit to E0 interface.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
steve.skinner@uk.pwc.com
Sent: 26 October 2004 10:31
To: Group Study
Subject: EIGRP without passive interface
Include 3725 E0 interface in the EIGRP process. Do not send out any EIGRP
hello packets out the Ethernet interface.
Accomplish this without using any passive-interface command.
.... iam sorry i don`t understand how this is possible ..
in order for eigrp to sync it needs to send hello packets to it`s
neigbhor...
i can use the neighbor command ,which will unicast ....but it STILL sends
hello`s...
if i nat ...all i do is change the type of packet .....it`s still a hello
packet
again i could turn it into a stub ...but it still has to send heelo`s to
communicate with it`s neigbhor...
AFAIK ....you CANT communicate between eigrp host WITHOUT hello`s
can someone please clarify...
question was posed by my SE....
many thanks in advance
Stephen Skinner
This archive was generated by hypermail 2.1.4 : Sat Nov 06 2004 - 17:11:53 GMT-3