From: John Wong (johnwk@unimelb.edu.au)
Date: Mon Oct 25 2004 - 02:09:28 GMT-3
Hi all,
Problem solved. Looks like its a faulty serial port on R3. I swapped the
cable over to another port on the same module and it was fine.
Thanks all! Now I can go back to mucking around with IS-IS....
Ian Stong wrote:
> Hi,
>
> Would suggest if possible that you swap the serial cables and see if the
> pings (with debug on) are different. I.E. are the results the same or do
> they follow the cable ends. If the results change then I suspect bad
> cables. If the results do not change then I suspect a bad interface.
>
>
> Thanks,
>
> Ian
> www.ccie4u.com
> Rack Rentals and Lab Scenarios starting at $20
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Nov 06 2004 - 17:11:52 GMT-3