From: Anand Singh (anandksi@cisco.com)
Date: Fri Oct 22 2004 - 21:41:57 GMT-3
Yes, we can use "match ip dscp cs5"..
-Anand
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
> Behalf Of Cisco Net
> Sent: Friday, October 22, 2004 3:21 PM
> To: Group Study
> Subject: Fwd: QOS [IE lab 9]
>
>
> Sorry this was an IE lab 7 question
> Cert
>
>
> ---------- Forwarded message ----------
> From: Cisco Net <network.cisco@gmail.com>
> Date: Fri, 22 Oct 2004 14:18:39 -0700
> Subject: QOS [IE lab 9]
> To: Group Study <ccielab@groupstudy.com>
>
>
> Hi
> Section 9.9.
> I want to set the DE bit for the non voip traffic.
> And classification,
> The solutions shows
> match not access-group XXX
>
> But since marking is already done, can i use
> match not ip dscp cs5 and set these packets with DE on R5/R4?
> I think both are fine but just want to hear from you all..
> Regards Cert
>
> ______________________________________________________________
> _________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Nov 06 2004 - 17:11:51 GMT-3