Re: DEBUG IP Packet on a CAT-3550????

From: ccie2be (ccie2be@nyc.rr.com)
Date: Fri Oct 22 2004 - 20:57:40 GMT-3


Hey Mas,

As you can see from the debug output below, I'm not seeing any ip unicast
traffic, but should I expect the debug command to work the same way on a
3550 as a regular router?

Thanks, Tim
----- Original Message -----
From: "P729" <p729@cox.net>
To: "ccie2be" <ccie2be@nyc.rr.com>; "Anthony Pace"
<anthonypace@fastmail.fm>; <ccielab@groupstudy.com>
Sent: Friday, October 22, 2004 7:53 PM
Subject: Re: DEBUG IP Packet on a CAT-3550????

> ...but are you seeing any _transit unicast_ traffic or just traffic
to/from
> the swtch itself and multicast traffic?
>
> Regards,
>
> Mas Kato
> https://ecardfile.com/id/mkato
>
> ----- Original Message -----
> From: "ccie2be" <ccie2be@nyc.rr.com>
> To: "Anthony Pace" <anthonypace@fastmail.fm>; <ccielab@groupstudy.com>
> Sent: Friday, October 22, 2004 2:02 PM
> Subject: Re: DEBUG IP Packet on a CAT-3550????
>
>
> > Hey Anthony,
> >
> > What's the issue with this? And, what version of IOS is running?
> >
> > I just ran debug ip packet on a 3550 and everything looked fine.
> >
> > Rack1SW2#deb ip packet
> > IP packet debugging is on
> > Rack1SW2#p
> > 07:48:09: datagramsize=60, IP 0: s=164.3.18.8 (local), d=224.0.0.10
> > (FastEtherne
> > t0/15), totlen 60, fragment 0, fo 0, sending broad/multicast
> > 07:48:09: datagramsize=74, IP 0: s=164.3.18.8 (local), d=224.0.0.10
> > (FastEtherne
> > t0/15), totlen 60, fragment 0, fo 0, sending full packet
> > 07:48:10: datagramsize=64, IP 0: s=150.3.8.8 (local), d=224.0.0.10
> > (Loopback0),
> > totlen 60, fragment 0, fo 0, sending broad/multicast
> > 07:48:10: datagramsize=60, IP 0: s=150.3.8.8 (local), d=224.0.0.10
> > (Loopback0),
> > totlen 60, frag
> > Rack1SW2#p ment 0, fo 0, sending full packet
> > 07:48:10: datagramsize=60, IP 0: s=150.3.8.8 (Loopback0), d=224.0.0.10,
> > totlen 6
> > 0, fragment 0, fo 0, rcvd 2
> > Rack1SW2#p
> > 07:48:12: datagramsize=78, IP 0: s=164.3.18.1 (FastEthernet0/15),
> > d=224.0.0.10,
> > totlen 60, fragment 0, fo 0, rcvd 2
> > Rack1SW2#
> > 07:48:13: datagramsize=60, IP 0: s=164.3.18.8 (local), d=224.0.0.10
> > (FastEtherne
> > t0/15), totlen 60, fragment 0, fo 0, sending broad/multicast
> > 07:48:13: datagramsize=74, IP 0: s=164.3.18.8 (local), d=224.0.0.10
> > (FastEtherne
> > t0/15), totlen 60, fragment 0, fo 0, sending full packet
> > 07:48:14: datagramsize=60, IP 0: s=150.3.8.8 (local), d=224.0.0.10
> > (Loopback0),
> > totlen 60, fragment 0, fo 0, sending broad/multicast
> > 07:48:14: datagramsize=60, IP 0: s=150.3.8.8 (local), d=224.0.0.10
> > (Loopback0),
> > totlen 60, fragme
> > Rack1SW2#nt 0, fo 0, sending full packet
> > 07:48:14: datagramsize=60, IP 0: s=150.3.8.8 (Loopback0), d=224.0.0.10,
> > totlen 6
> > 0, fragment 0, fo 0, rcvd 2
> > Rack1SW2#un all
> > All possible debugging has been turned off
> > Rack1SW2#
> > 07:48:17: datagramsize=78, IP 0: s=164.3.18.1 (FastEthernet0/15),
> > d=224.0.0.10,
> > totlen 60, fragment 0, fo 0, rcvd 2
> > Rack1SW2#
> >
> > Rack1SW2#sh ver
> > Cisco Internetwork Operating System Software
> > IOS (tm) C3550 Software (C3550-I5K2L2Q3-M), Version 12.1(19)EA1, RELEASE
> > SOFTWAR
> > E (fc2)
> > Copyright (c) 1986-2003 by cisco Systems, Inc.
> > Compiled Fri 24-Oct-03 00:51 by yenanh
> > Image text-base: 0x00003000, data-base: 0x0093F1B4
> >
> > ROM: Bootstrap program is C3550 boot loader
> >
> > Rack1SW2 uptime is 7 hours, 50 minutes
> > System returned to ROM by power-on
> > System image file is
> > "flash:c3550-i5k2l2q3-mz.121-19.EA1/c3550-i5k2l2q3-mz.121-1
> > 9.EA1.bin"
> >
> >
> > This product contains cryptographic features and is subject to United
> > States and local country laws governing import, export, transfer and
> > use. Delivery of Cisco cryptographic products does not imply
> > third-party authority to import, export, distribute or use encryption.
> > Importers, exporters, distributors and users are responsible for
> > compliance with U.S. and local country laws. By using this product you
> > agree to comply with applicable laws and regulations. If you are unable
> > to comply with U.S. and local laws, return this product immediately.
> >
> > A summary of U.S. laws governing Cisco cryptographic products may be
found
> > at:
> > http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
> >
> > If you require further assistance please contact us by sending email to
> > export@cisco.com.
> >
> > cisco WS-C3550-24 (PowerPC) processor (revision E0) with 65526K/8192K
> > bytes
> > of m
> > emory.
> > Processor board ID CHK0635W02R
> > Last reset from warm-reset
> > Bridging software.
> > Running Layer2/3 Switching Image
> >
> > Ethernet-controller 1 has 12 Fast Ethernet/IEEE 802.3 interfaces
> >
> > Ethernet-controller 2 has 12 Fast Ethernet/IEEE 802.3 interfaces
> >
> > Ethernet-controller 3 has 1 Gigabit Ethernet/IEEE 802.3 interface
> >
> > Ethernet-controller 4 has 1 Gigabit Ethernet/IEEE 802.3 interface
> >
> > 24 FastEthernet/IEEE 802.3 interface(s)
> > 2 Gigabit Ethernet/IEEE 802.3 interface(s)
> >
> > The password-recovery mechanism is enabled.
> > 384K bytes of flash-simulated non-volatile configuration memory.
> > Base ethernet MAC Address: 00:0A:B7:DC:9B:00
> > Motherboard assembly number: 73-5700-08
> > Power supply part number: 34-0966-02
> > Motherboard serial number: CAT063405J3
> > Power supply serial number: DCA06340P2Z
> > Model revision number: E0
> > Motherboard revision number: D0
> > Model number: WS-C3550-24-SMI
> > System serial number: CHK0635W02R
> > Configuration register is 0x10F
> >
> > Rack1SW2#
> > ----- Original Message -----
> > From: "Anthony Pace" <anthonypace@fastmail.fm>
> > To: <ccielab@groupstudy.com>
> > Sent: Friday, October 22, 2004 4:39 PM
> > Subject: DEBUG IP Packet on a CAT-3550????
> >
> >
> >> Has anyone found a workaround to DEBUG IP PACKET on the CAT-3550? The
> >> issue is that to get the DEBUG, you need to disable ip route-cache at
> >> the interface level (this is fine) and disable CEF globally (this
cannot
> >> be done on the 3550 - this is not a "knob" you can turn)
> >>
> >> Tony Pace CCIE-10349
> >> --
> >> Anthony Pace
> >> anthonypace@fastmail.fm
> >>
> >> _______________________________________________________________________
> >> Subscription information may be found at:
> >> http://www.groupstudy.com/list/CCIELab.html
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html



This archive was generated by hypermail 2.1.4 : Sat Nov 06 2004 - 17:11:51 GMT-3