From: ccie2be (ccie2be@nyc.rr.com)
Date: Wed Oct 20 2004 - 20:20:38 GMT-3
Gary,
I learned this the hard way.
Before even trying to use, csim start, ping the destination ip address. One
more than once, I discovered that the problem wasn't my voice config, it was
something else.
HTH, Tim
----- Original Message -----
From: "Gary Woodward" <aoqo89@dsl.pipex.com>
To: <ccielab@groupstudy.com>
Sent: Wednesday, October 20, 2004 12:14 PM
Subject: CSIM START Error ccappmib: insertion error
> When testing voice call success using csim start I see an error "ccappmib:
> insertion error. duplicate name CSIM".
>
> I can only assume my call has been succesful since I am not seeing a
> disconnect message from the output.
>
> Does anyone know what this error means? I can find no hits looking on
google
> or CCO. Should I just ignore it on the basis my call appears to be
successful.
>
>
>
> Rack1R2#csim start 2222
> csim: called number = 2222, loop count = 1 ping count = 0
>
> ccappmib: insertion error. duplicate name CSIM
> csim: loop = 1, failed = 1
> csim: call attempted = 1, setup failed = 1, tone failed = 0
>
> Thanks
>
> Gary Woodward
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Nov 06 2004 - 17:11:50 GMT-3