From: Mark Lasarko (mlasarko@co.ba.md.us)
Date: Thu Oct 14 2004 - 19:37:48 GMT-3
Greetings Tim,
How often are you seeing this? (Intermittent or terminal?)
When did it start?
I had a similar problem when I went from 12.1.x to 12.2.x code on a
7505
Dual RSP2's and Dual VIP's running FastE and ATM...
It would run for a day or two then crash hard.
Fortunately for me it was a lab chassis
~ No career-limiting actions had to be taken :)
A fellow engineer advised me to try "ipc cache size "x"
I think I used 5000 for the variable?
This seemed to help; Only one crash in two weeks thereafter.
I wound up going back to 12.1.x anyway since I could not be there to
babysit.
Have you posted this to the NSP list yet?
HTH,
~M
>>> "ccie2be" <ccie2be@nyc.rr.com> 10/14/2004 6:05:51 PM >>>
Hi all,
Anyone ever see this kind debug output? I don't know what it means but
when I
see the word "failed" I know it can't be good.
*Oct 14 18:13:11.100: %CBUS-3-ADDRFILTR: Interface FastEthernet1/0/0,
address
fi
lter write command failed, code 0x8010
-Traceback= 6043B970 6043C1B0 6043C338 60334CAC 6055DE4C 60803B30
605DE420
605DE
364 605FA3F8 605FA5B4 602F7A94 60309D8C 603755C0 603755AC
*Oct 14 18:04:44.016: %CBUS-3-CCBCMDFAIL1: Controller 1, cmd (61
0x00000000)
fai
led (0x8010)
*Oct 14 18:04:44.028: %CBUS-4-RSETFAIL: Interface FastEthernet1/0/0
failed to
re
set properly in cbus_pas_ethernet_reset(), code 0x8010
*Oct 14 18:04:44.028: RIP: sending request on FastEthernet1/0/0.6 to
224.0.0.9
This is what I'm running:
Rack1R6#sh ver
Cisco Internetwork Operating System Software
IOS (tm) RSP Software (RSP-JK9O3SV-M), Version 12.2(11)T9, RELEASE
SOFTWARE
(fc
1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Sun 22-Jun-03 12:27 by cmong
Image text-base: 0x60010948, data-base: 0x61EF0000
ROM: System Bootstrap, Version 11.1(2) [nitin 2], RELEASE SOFTWARE
(fc1)
BOOTLDR: RSP Software (RSP-BOOT-M), Version 12.1(3), RELEASE SOFTWARE
(fc1)
Rack1R6 uptime is 3 days, 6 hours, 39 minutes
System returned to ROM by reload at 11:28:17 UTC Mon Oct 11 2004
System image file is "slot0:rsp-jk9o3sv-mz.122-11.T9.bin"
cisco RSP2 (R4700) processor with 131072K/2072K bytes of memory.
R4700 CPU at 100Mhz, Implementation 33, Rev 1.0
Last reset from power-on
G.703/E1 software, Version 1.0.
G.703/JT2 software, Version 1.0.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
Bridging software.
TN3270 Emulation software.
Chassis Interface.
2 VIP2 controllers (1 FastEthernet)(1 ATM).
1 FastEthernet/IEEE 802.3 interface(s)
1 ATM network interface(s)
123K bytes of non-volatile configuration memory.
20480K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).
8192K bytes of Flash internal SIMM (Sector size 256K).
Configuration register is 0x2102
Any guidance would be greatly appreciated.
Thanks, Tim
This archive was generated by hypermail 2.1.4 : Sat Nov 06 2004 - 17:11:48 GMT-3