From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Tue Oct 12 2004 - 13:31:25 GMT-3
When matching "dlsw" it only matches direct encapsulation over
SDLC, HDLC, and Frame Relay without the LLC2 header (i.e. not DLSw+
Lite). To match DLSw+ over TCP, match the port number 2065, or in the
case that DLSw+ prioritization is configured, 2065 along with 1981,
1982, and 1983.
HTH,
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Hai Minh
> Sent: Tuesday, October 12, 2004 5:12 AM
> To: ccielab@groupstudy.com
> Subject: "protocol DLSW" or "tcp 2065"
>
> Hi group ?
>
> To configure priority-list to allow DLSW traffic, I've got this from
> Internet
> priority-list 1 protocol ip high tcp 2065
>
> Can I use "priority-list 1 protocol dlsw high" instead of the command
> above ?
> If I can't, what is the differents ?
>
> Thanks
>
>
This archive was generated by hypermail 2.1.4 : Sat Nov 06 2004 - 17:11:46 GMT-3