From: Cisco Net (network.cisco@gmail.com)
Date: Mon Oct 11 2004 - 21:27:38 GMT-3
Hi
One basic question,
When i enable interface-dlci command on a main interface or
on a multipoint sub interface, do i need to enabel INV ARP.
In my case it did not work fine and i am assuming that "frame-rlay
interface-dlci" is expecting some kind of mapping with staic or
dynamically in case of multipoint interfaces.... I just want to see
this is expected or not.
R1:
ip address 148.1.35.3 255.255.255.0
encapsulation frame-relay
clockrate 64000
no arp frame-relay
frame-relay interface-dlci 123
no frame-relay inverse-arp
R2:
interface Serial1/0
ip address 148.1.35.5 255.255.255.0
encapsulation frame-relay
no arp frame-relay
frame-relay interface-dlci 321
no frame-relay inverse-arp
Ping between these IP add does not work.
Please advice
Thanks
Regards
Cert
This archive was generated by hypermail 2.1.4 : Sat Nov 06 2004 - 17:11:46 GMT-3