From: Bob Sinclair (bsin@cox.net)
Date: Fri Oct 08 2004 - 10:58:04 GMT-3
Troy,
With nbma-mode configured on the hub, you can get sparse-mode traffic to go
from one spoke to another. (I have not seen this particular functionality
mentioned in the Cisco docs, so please let me know if you have such a link).
If you want the auto-rp mapping agent to work from a spoke in such a
scenario, then you will have to make sure that the 224.0.1.40 group is
distributed as a sparse-mode group. One way to do this is to define a
static RP just for this group.
Bob Sinclair
CCIE #10427, CISSP, MCSE
www.netmasterclass.net
----- Original Message -----
From: "Troy" <ta_levin@yahoo.com>
To: <ccielab@groupstudy.com>
Sent: Thursday, October 07, 2004 8:29 PM
Subject: ip pim-nbma command
> In a Hub and spoke configuration where the Hub has a P2mp interface does
> the ip pim-nbma command overcome multicast spilt-horizon? In addition can
> the mapping agent in this configuration be on one spoke? Will the other
> spoke receive the rp mappings?
>
> Thnaks,
>
> Troy
>
>
>
> ---------------------------------
> Do you Yahoo!?
> vote.yahoo.com - Register online to vote today!
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Nov 06 2004 - 17:11:45 GMT-3