From: Larry Roberts (groupstudy@american-hero.com)
Date: Wed Oct 06 2004 - 15:03:38 GMT-3
I don't have the book in front of me, but it appears to be two separate
command entries. I suspect that the carriage return wasn't inserted, or the
cut-and-paste went haywire.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
steve.skinner@uk.pwc.com
Sent: Wednesday, October 06, 2004 12:47 PM
To: ccielab@groupstudy.com
Subject: CCIe R/S lab book ( cisco version) area 4 virtual-link
Guys
going throught lab 2 and saw this config
cant find it referenced in the 12.2T or 12.3 mainline ios command list ref
area 4 virual-link 10.6.6.6 network 10.5.5.4 0.0.0.3 area 3
am running 12.3.3e and 12.3.6 get the following results
this is my show ver and config
System image file is "flash:c2600-ipbase-mz.123-6.bin"
System image file is "slot0:c3725-i-mz.123-3e.bin"
DOCK-CSR1(config-router)#area 4 virtual-link 10.6.6.6. ?
% Unrecognized command
DOCK-CSR1(config-router)#area 4 virtual-link 10.6.6.6 ?
authentication Set authentication type
authentication-key Set authentication key
dead-interval Dead router detection time
hello-interval Hello packet interval
message-digest-key Set message digest key
retransmit-interval LSA retransmit interval
transmit-delay LSA transmission delay
<cr>
DOCK-CSR1(config-router)#area 4 virtual-link 10.6.6.6 net?
% Unrecognized command
DOCK-CSR1(config-router)#area 4 virtual-link 10.6.6.6 net
can anyone shed some light please
many thanks
Stephen Skinner
Senior Network Analyst
PricewaterHouse Coopers LLP
Tel +44 02075834182
Fax +44 02078048235
This archive was generated by hypermail 2.1.4 : Sat Nov 06 2004 - 17:11:44 GMT-3