From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Tue Oct 05 2004 - 13:14:45 GMT-3
Look at the error message. It is saying that the bandwidth MUST be
GREATER than 1%.
Rack2R6(config-if)#do sho run | be policy-map ICMP->POLICY
policy-map ICMP->POLICY
class MATCH->ICMP
bandwidth 128
!
Rack2R6(config-pmap-c)#int atm0/0/0
Rack2R6(config-if)# service-policy out ICMP->POLICY
bandwidth assignment must be at least 1% of link rate
Rack2R6(config-if)#policy-map ICMP->POLICY
Rack2R6(config-pmap)# class MATCH->ICMP
Rack2R6(config-pmap-c)#bandwidth 2400 <-- value greater than 1%
Rack2R6(config-pmap-c)#int atm0/0/0
Rack2R6(config-if)# service-policy out ICMP->POLICY
Rack2R6(config-if)#
Another option would be to change the bandwidth of the interface so that
the value you have entered is equal to at least 1% of the interface's
bandwidth.
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
ccie Meftahi
Sent: Tuesday, October 05, 2004 7:45 AM
To: ccielab@groupstudy.com
Subject: Policy not attaching to interface
Hi Group
Has anyone seen this message before _
Bandwidth parameter must be greater than 1 percent of bandwidth for VC 5
on Int ATM3/1.1
When attaching a policy map, it is simply rejected with the above
message. My BW reservation is way below 75% total BW required.
Running
12.0(27)S1 on 12010.
Tia
Sam
---------------------------------
ALL-NEW Yahoo! Messenger - all new features - even more fun!
This archive was generated by hypermail 2.1.4 : Sat Nov 06 2004 - 17:11:43 GMT-3