From: Capt.Spock (Capt.spock@gmail.com)
Date: Mon Oct 04 2004 - 14:15:55 GMT-3
Thanks to all.
No exec did the trick!
On Mon, 4 Oct 2004 11:23:14 -0400, Chuck South <cciesouth@bellsouth.net> wrote:
> Captain,
> I had the same problem with my terminal server a while back.
>
> "no exec" took care of it...
>
> http://www.cisco.com/en/US/tech/tk801/tk36/technologies_configuration_example09186a008014f8e7.shtml
>
> >
> > From: "Capt.Spock" <Capt.spock@gmail.com>
> > Date: 2004/10/03 Sun AM 07:42:15 EDT
>
>
> > To: "ccielab@groupstudy.com" <ccielab@groupstudy.com>
> > Subject: Cannot re-connect to routers unless I issue the "clear line x"
> > multiple times on Terminal server
> >
> > I have couple of routers connected to terminal server. I cannot
> > re-connect to routers unless I issue the "clear line x" multiple times
> > on Terminal server...
> >
> > Ex:-
> > cle line 1
> > cle line 1
> > cle line 1
> > cle line 1
> >
> > Sounds as if the terminal server has some kind of limited buffer.
> >
> > Any help is appreciated.
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Nov 06 2004 - 17:11:42 GMT-3