From: gladston@br.ibm.com
Date: Fri Oct 01 2004 - 17:18:56 GMT-3
Any advice on where to use "frame-relay ip rtp header-compression"?
This Cisco example use it on the physical interface.
================
from Cisco
interface Serial0/0
bandwidth 128
no ip address
encapsulation frame-relay
no fair-queue
frame-relay traffic-shaping
frame-relay ip rtp header-compression
!--- Turns on traffic shaping and cRTP. If traffic-shaping is not
!--- enabled, then map-class does not start and FRF.12 and LLQ will
!--- not work.
!
interface Serial0/0.1 point-to-point
bandwidth 128
ip address 192.168.10.2 255.255.255.252
frame-relay interface-dlci 300
class VOIPovFR
http://www.cisco.com/en/US/tech/tk652/tk698/technologies_configuration_example09186a0080094af9.shtml
=================
This archive was generated by hypermail 2.1.4 : Sat Nov 06 2004 - 17:11:41 GMT-3