From: Edwards, Andrew M (andrew.m.edwards@boeing.com)
Date: Wed Sep 29 2004 - 12:44:43 GMT-3
Few questions:
1. do you want a per b-channel dial-peer selection? Try ds0-group
command under E1 controller to assign timeslots to logical voice-ports.
If its just problems trunking to a PBX, sounds like it might be
interoperability stuff. Who makes the PBX?
Here is a link for vendor interoperability from Cisco that might help...
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/cis3600/s
w_conf/pbx_int/
HTH
andy
-----Original Message-----
From: Alex Hsieh [mailto:ccie21@hotmail.com]
Sent: Wednesday, September 29, 2004 7:27 AM
To: ccielab@groupstudy.com
Subject: isdn channel problem
hi folks:
Currently I have router connected to PBX using E1 PRI.How do I
config
router such that
incoming voice calls from remote site to select b-channel that's
functional.Router seems to
keep trying sending calls to faulty channel(31) thus calls can't be
completed.Thanks for help.
This archive was generated by hypermail 2.1.4 : Fri Oct 01 2004 - 15:00:51 GMT-3