From: Matthew Seppeler (Matt.Seppeler@InetX.com)
Date: Mon Sep 27 2004 - 15:44:43 GMT-3
Mani,
One way I know of changing the metric in EIGRP is via the delay command
in interface configuration mode. To see the default delay, use the show
interfaces command.
Matt Seppeler
InterNetwork Experts
Email: mseppeler@inetx.com
-----Original Message-----
From: mani poopal [mailto:mani_ccie@yahoo.com]
Sent: Sunday, September 26, 2004 9:23 PM
To: ccielab@groupstudy.com
Subject: EIGRP METRIC
Hi Group,
I tried to change eigrp metric from a neighbor using following two
commands, but I couldn't achieve the desired result, I would like to
know the mistake I am making. Any feed back is appreciated(I know I
could adjust bandwidth and delay to modify metrics of eigrp)
R1 s0 -----------------eigrp 100--------------- s0 R2
R2
int s 0
offset-list 0 in 5555 interface serial 0
PS: I thought R2 should change the metric of all learned
routes(offset-list 0) to 5555. I even applied following command on R1,
offset-list 0 out 5555 serial 0. I know that I could have chaged delay
at R1, S0 or link bandwidth, but I wanted to see the result by using
offset list command. In RIP this command modifies the metric, hop
count. In EIGRP this command must change the composite metric.
thanks in advance
Mani
B.ENG,A+,CCNA,CCNP,CCNP-VOICE, CSS1,CNA,MCSE
(416)431 9929
MANI_CCIE@YAHOO.COM
---------------------------------
Do you Yahoo!?
vote.yahoo.com - Register online to vote today!
This archive was generated by hypermail 2.1.4 : Fri Oct 01 2004 - 15:00:50 GMT-3