From: ccie2be (ccie2be@nyc.rr.com)
Date: Mon Sep 27 2004 - 02:20:03 GMT-3
Manu,
You use the same command to apply shaping parameters to a dlci on a
multipoint int as you do for a p2p int. I've got burned on that myself.
Unlike with isdn, with f/r static maps, there's no class option, so just use
the fram interface dlci x command under the p2m int and that will put dlci
config mode. Then specify the class.
HTH, Tim
----- Original Message -----
From: "MANU mohan" <cciemanu@rediffmail.com>
To: <ccielab@groupstudy.com>
Sent: Sunday, September 26, 2004 12:22 AM
Subject: Frame Relay Traffic-shaping
>
> Hai,
> How can we apply frame-relay map class to a particular dlci when we
> are using static mapping ?
> Manu
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Oct 01 2004 - 15:00:49 GMT-3