From: Hogo, Trust (trust.hogo@sarcom.com)
Date: Sun Sep 26 2004 - 19:20:18 GMT-3
Did you sent all your routers with " ip ospf hello-interval 1" You will
not form adjacency if this is different. Could you also provide the
configs for all devices involved.
Thanks
HQ
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
mgrenham@eircom.net
Sent: Sunday, September 26, 2004 5:32 AM
To: Hoonpongsimanont, Chalermchai; mgrenham@eircom.net
Cc: ccielab@groupstudy.com
Subject: RE: OSPF neighbors on Cat 3550 VLAN interface
Hi David,
I have configured the catalyst to ignore MTU size on the VLAN interface
as follows.
there is no NAT or access-lists or anything else fancy configured at
all.
interface Vlan120
ip address 137.10.125.10 255.255.255.0
ip ospf hello-interval 1
ip ospf priority 2
ip ospf mtu-ignore
Ollie.
"Hoonpongsimanont, Chalermchai"
<chalermchai.hoonpongsimanont@atosorigin.com> wrote:
<
< Hi,
<
< Could you please check following things?
<
< - MTU; make sure you have consistent MTU setting in Ethernet segment.
< - Do you have duplicated router-id?
< - Any policy-based routing, access-list or NAT configured?
<
< You may want to check out this link
<
http://www.cisco.com/en/US/partner/tech/tk365/tk480/technologies_tech_no
te09
< 186a0080093f0d.shtml
<
< David
<
<
This archive was generated by hypermail 2.1.4 : Fri Oct 01 2004 - 15:00:49 GMT-3