RE: DLSW pass thru feature

From: kasturi cisco (kasturi_cisco@hotmail.com)
Date: Thu Sep 23 2004 - 17:11:27 GMT-3

Mani,

Looks like this post of urs never got answered. But anyways (dont know if
u figured it out) i though will try to explain:

Direct encapsulation is supported over High-Level Data Link Control
(HDLC) and Frame Relay.The following command specifies a DLSw remote peer
with direct encapsulation over HDLC:

dlsw remote-peer 0 interface serial 01

Direct encapsulation over Frame Relay comes in two forms:
DLSw Lite (LLC2 encapsulation) and Passthrough.

Specifying the pass-thru option configures the router so that the traffic
will not be locally acknowledged.(DLSw+ normally locally acknowledges traffic
to keep traffic on the WAN to a minimum.) <<< so this cud be a LAb req.

The following command specifies a DLSw remote peer with Direct
encapsulation with pass-thru over Frame Relay:

dlsw remote-peer 0 frame-relay interface serial 01 pass-thru

Here is the link for more info:

http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_configuration_guide_chapter09186a00800ca770.html#wp1004373

OR http://www.cisco.com/en/US/products/sw/iosswrel/ps1826/products_configuration_guide_chapter09186a00800d9c06.html

OR http://www.cisco.com/en/US/tech/tk331/tk336/technologies_design_guide09186a0080237a5e.shtml

Anyways these are good (must to read..check IOS ver) DLSW+ dcos.

Good Luck,
Kasturi.

------------------------------------------------------------------------

All the news that matters. All the gossip from home. Specially for NRIs!

This archive was generated by hypermail 2.1.4 : Fri Oct 01 2004 - 15:00:47 GMT-3