From: Carlos G Mendioroz (tron@huapi.ba.ar)
Date: Tue Sep 21 2004 - 07:20:08 GMT-3
Many carrier level ATM switches do have configuration on only one side.
That comes from the implementation way, which actually makes SVCs for
the PVCs (that is, propietary signalled SVCs) which makes it easy to
offer PVC rerouting on failures, etc.
Jonathan R. Charles wrote:
> I noticed that, which seems odd (I originally tried creating the inverse on
> the other interface and the switch laughed at me... I am actually used to
> configuring Nortel Passport ATM switches, and you need a PVC mapping on both
> ends... But that is more of a carrier grade thing than the LS1010...
>
>
>
>
> Jonathan
>
> -----Original Message-----
> From: Brian Dennis [mailto:bdennis@internetworkexpert.com]
> Sent: Monday, September 20, 2004 23:13
> To: Jonathan R. Charles; ccielab@groupstudy.com
> Subject: RE: Sample LS1010 config
>
> Jonathan,
> The command is the "atm pvc" interface command. Unlike a Frame
> Relay switch, the LS1010 does not need a statement on both interfaces.
>
> LS1010:
> interface ATM0/0/0
> description ATM to Rack1R6 ATM 0/0/0
> !
> interface ATM1/0/3
> description ATM to BB1 ATM 0/0
> atm pvc 0 101 interface ATM0/0/0 0 101
>
> Rack1R6:
> interface ATM0/0/0
> ip address 54.1.1.6 255.255.255.0
> pvc 0/101
> protocol ip 54.1.1.254 broadcast
>
> BB1:
> interface ATM0/0
> ip address 54.1.1.254 255.255.255.0
> pvc 0/101
> protocol ip 54.1.1.6 broadcast
>
> Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
> bdennis@internetworkexpert.com
>
> Internetwork Expert, Inc.
> http://www.InternetworkExpert.com
> Toll Free: 877-224-8987
> Direct: 775-745-6404 (Outside the US and Canada)
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Jonathan R. Charles
> Sent: Monday, September 20, 2004 8:26 PM
> To: ccielab@groupstudy.com
> Subject: Sample LS1010 config
>
> I got assigned a rack of equipment, and it looks like no pvcs are built
> on
> the LS1010, does anyone have a good sample config on how you do the
> equivalent of the frame-relay route commands for ATM?
>
>
>
>
>
> Thanx
>
>
>
>
>
>
>
> Jonathan
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Carlos G Mendioroz <tron@huapi.ba.ar> LW7 EQI Argentina
This archive was generated by hypermail 2.1.4 : Fri Oct 01 2004 - 15:00:47 GMT-3