From: Wei Zhu (zhuwei1231@yahoo.ca)
Date: Wed Sep 15 2004 - 23:43:51 GMT-3
Setup voice data to precedence 5 (CS5) and signal data to precedence3 (CS3)
under dial peer on MC3810 running 12.2(15)T13, tried to policy route the
voice data and signal to different next hop, could see signal data matched,
but nothing else. I tried to use " match udp any any " and could see the
count increased. I also tried to match each precedence seperately but only
see the precedence 3 matched. How can I match local generated voice data
with precedence 5?
Thanks
Wei
----- Original Message -----
From: "James" <james@towardex.com>
To: "Wei Zhu" <zhuwei1231@yahoo.ca>
Cc: <ccielab@groupstudy.com>
Sent: Wednesday, September 15, 2004 10:16 PM
Subject: Re: policy routing local generated voice traffic?
> On Wed, Sep 15, 2004 at 08:52:18PM -0400, Wei Zhu wrote:
>> Using ip policy route-map doesn't policy route local generated voice
>> traffic,
>> although it is tested good for local generated telnet traffic. Any
>> comment?
>
> Not sure if this may work, but have tried doing
> 'ip local policy <etc>'
> ?
>
> HTH,
> -J
>
>
> --
> James Jun TowardEX
> Technologies, Inc.
> Technical Lead Network Design, Consulting, IT
> Outsourcing
> james@towardex.com Boston-based Colocation & Bandwidth
> Services
> cell: 1(978)-394-2867 web: http://www.towardex.com , noc:
> www.twdx.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Oct 01 2004 - 15:00:44 GMT-3