From: Bryan Osoro (bryanosoro@yahoo.com)
Date: Sat Sep 11 2004 - 17:40:49 GMT-3
I'm trying to do it without SNMP. Any ideas there?
I'll dig through mib controls in parallel.
thanks
B
--- "Howard C. Berkowitz" <hcb@gettcomm.com> wrote:
> At 1:33 PM -0700 9/11/04, Bryan Osoro wrote:
> >I'm trying modify IOS IGMP default behavior.
> >
> >Any idea how to tweak IGMP like this?
> >
> >Two routers on a LAN segment should query for
> >membership ever 10 seconds. Additionally, if one of
> >the routers goes down, the other should take over
> >within 16 seconds.
> >
> >The ip igmp querier-timeout should allow you to do
> >this, but the minimum value you can actually
> configure
> >is 60 seconds.
> >
> >If you manipulate the ip igmp query-interval, the
> >querier-timeout is automatically double. So, if I
> >change that to 8, the querier timeout becomes 16.
> >However, this means that the router is querying the
> >LAN every 8 seconds, and not 10. Anyway to change
> >this behavior?
> >
>
> Have you checked whether there is a MIB variable
> available that will
> give you different control than the configuration
> command?
>
>
This archive was generated by hypermail 2.1.4 : Fri Oct 01 2004 - 15:00:41 GMT-3