From: McCallum, Robert (robert.mccallum@thus.net)
Date: Fri Sep 10 2004 - 11:57:53 GMT-3
show ip mroute
show ip pim
show ip rpf
show ip pim rp
ping
Robert McCallum
CCIE #8757 R&S
01415663448
07818002241
> -----Original Message-----
> From: jean.paul.baaklini@accenture.com
> [mailto:jean.paul.baaklini@accenture.com]
> Sent: 10 September 2004 15:03
> To: ccielab@groupstudy.com
> Subject: Multicast verification
>
>
> Hi Everyone,
>
> When configuring Unicast routing, you can use tools like
> ping, traceroute, sh ip route, ... to make sure your
> configuration is correct.
>
> I (and other CCIE candidates I talked to) have very hard time
> understanding which "similar" commands I can use to make sure
> my configuration is working. I understood the RPF concept,
> it's just that I would like to be sure,... I'd be grateful if
> anyone could advice on this.
>
> Thanks.
> JP
>
>
> This message is for the designated recipient only and may
> contain privileged, proprietary, or otherwise private
> information. If you have received it in error, please notify
> the sender immediately and delete the original. Any other
> use of the email by you is prohibited.
>
> ______________________________________________________________
> _________
> Please help support GroupStudy by purchasing your study
> materials from: http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Oct 01 2004 - 15:00:41 GMT-3