From: John Matus (jmatus@pacbell.net)
Date: Fri Sep 10 2004 - 01:10:38 GMT-3
i believe that the config should be:
aaa new-model
aaa authen login default local
line vty 0 4
login local
.... but i don't have a router in front of me <so my syntax could be off>
Regards,
John D. Matus
MCSE, CCNP
Office: 818-782-2061
Cell: 818-430-8372
jmatus@pacbell.net
----- Original Message -----
From: "Peng Zheng" <zpnist@yahoo.com>
To: <ccielab@groupstudy.com>
Sent: Thursday, September 09, 2004 9:02 PM
Subject: username access-class
> I want to try
>
> Here is my config:
>
> username TEST access-class 1 password 0 CISCO
> aaa new-model
> !
> !
> aaa authentication login default none
> aaa authentication login VTY local
>
> access-list 1 permit 192.168.1.3
>
> line vty 0 4
> login authentication VTY
>
>
> Then I telnet from 192.168.1.2, but I can login with
> username TEST.
>
> Anything wrong with my config?
>
>
> Thanks.
>
>
>
>
> _______________________________
> Do you Yahoo!?
> Shop for Back-to-School deals on Yahoo! Shopping.
> http://shopping.yahoo.com/backtoschool
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Oct 01 2004 - 15:00:41 GMT-3