From: Kenneth Wygand (KWygand@customonline.com)
Date: Wed Sep 08 2004 - 17:55:17 GMT-3
Tim,
You will usually get this if you already have a route in your routing
table that has a better distance than the one BGP is trying to install.
Have you modified the distances of any of your routes or any of your
routing protocols globally?
Kenneth E. Wygand
Systems Engineer, Project Services
CCIE #13720, CISSP #37102, CCNP/DP, ACSP,
Cisco IPT Design Specialist, MCP, CNA, Network+, A+
Custom Computer Specialists, Inc.
"Failure only occurs at the point in which one stops trying."
-Anonymous
Custom Computer Specialists, Inc.
"Celebrating 25 Years of Excellence"
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
ccie2be
Sent: Wednesday, September 08, 2004 4:46 PM
To: Group Study
Subject: BGP rib failure
HI guys,
when I did a show ip bgp I got this output
r>i 136.6.23.2 0 100 0 300 200 400
i
r 136.6.44.0/24 136.6.15.5 0 200 200 200
200
200
400 i
r>i 136.6.23.2 0 100 0 300 200 400
i
*>i205.90.31.0 136.6.23.2 0 100 0 300 200 254
?
As you can see, there's a "r" next to 2 of the entries. Why is that?
And,
more importantly, what should I do about it?
Also, how will that affect routing?
Thanks in advance, Tim
This archive was generated by hypermail 2.1.4 : Fri Oct 01 2004 - 15:00:40 GMT-3