From: Ty (tycampbell@comcast.net)
Date: Sun Sep 05 2004 - 08:24:07 GMT-3
here's the link if you need it
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fwan
_c/wcfppp.htm#37730
(it's not under the ATM section, but the ATM section has a link to it)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Scott Morris
Sent: Saturday, September 04, 2004 10:48 PM
To: 'Cisco Nuts'; ccielab@groupstudy.com
Cc: cisco@groupstudy.com
Subject: RE: aal5snap or aal5ciscoppp - which one ???
If you are running PPP over ATM, then you will either run "aal5ciscoppp" for
the Cisco proprietary method or "aal5mux ppp" for the IETF version of
things.
HTH,
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, CISSP,
JNCIP, et al.
IPExpert CCIE Program Manager
IPExpert Sr. Technical Instructor
swm@emanon.com/smorris@ipexpert.net
http://www.ipexpert.net
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Cisco Nuts
Sent: Saturday, September 04, 2004 11:36 PM
To: ccielab@groupstudy.com
Cc: cisco@groupstudy.com
Subject: aal5snap or aal5ciscoppp - which one ???
Hello,When you run ppp over atm and have a dialer interface, would the
encapsulation be #encap aal5snap or #encap
aal5ciscoppp Which one would be correct to use in the Lab?Thank
you.Sincerely #int atm 3/0#pvc 0/101 # encap aal5snap or encap aal5ciscoppp
# dialer pool-member 1 # prot ppp dialer
------------------------------------------------------------------------
FREE pop-up blocking with the new MSN Toolbar get it now!
This archive was generated by hypermail 2.1.4 : Fri Oct 01 2004 - 15:00:37 GMT-3