ripV2 unicast

From: James (james@towardex.com)
Date: Tue Aug 31 2004 - 18:25:21 GMT-3

• Next message: kasturi cisco: "RE: CCIE# 13836"
• Previous message: gladston@br.ibm.com: "Re: Re: ISIS L1 and L2 route"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Under RIPv2... when asked to perform unicast updates w/o using neigh + passive,
you can do this by NAT'ing destination udp port 520 with dest. ip of multicast
224.0.0.9 swapped to a unicast address.

Would other acceptable option be... using gre tunnel between two routers and
running rip over it? I woudl think its still unicast between the _routers_.

Thanks,
-J

-- 
James Jun                                            TowardEX Technologies, Inc.
Technical Lead                        Network Design, Consulting, IT Outsourcing
james@towardex.com                  Boston-based Colocation & Bandwidth Services
cell: 1(978)-394-2867           web: http://www.towardex.com , noc: www.twdx.net

• Next message: kasturi cisco: "RE: CCIE# 13836"
• Previous message: gladston@br.ibm.com: "Re: Re: ISIS L1 and L2 route"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Sep 03 2004 - 07:02:51 GMT-3