From: Scott Morris (swm@emanon.com)
Date: Thu Aug 26 2004 - 12:28:18 GMT-3
Why would that range be denied by default?
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, CISSP,
JNCIP, et al.
IPExpert CCIE Program Manager
IPExpert Sr. Technical Instructor
swm@emanon.com/smorris@ipexpert.net
http://www.ipexpert.net
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
gladston@br.ibm.com
Sent: Thursday, August 26, 2004 10:23 AM
To: ccielab@groupstudy.com
Subject: Multicast with Multiple RP
Is there any reason to explicity deny 239.0.0.0?
(considering that it would be denied anyway by default)
=========================
example from http://www.cisco.com/warp/public/105/48.html#autowithmult
RP 2 Configuration
ip multicast-routing
interface loopback0
ip address <address> <mask>
ip pim sparse-dense-mode
ip pim send-RP-announce loopback0 scope 16 group-list 1 ip pim
send-RP-discovery scope 16
access-list 1 deny 239.0.0.0 0.255.255.255 access-list 1 permit 224.0.0.0
15.255.255.255 =============================
This archive was generated by hypermail 2.1.4 : Fri Sep 03 2004 - 07:02:49 GMT-3