From: Carlos G Mendioroz (tron@huapi.ba.ar)
Date: Wed Aug 25 2004 - 21:19:51 GMT-3
Hmm, in this case it would not be connected, it would be ospf intraarea.
But serial route will not be installed because that would be inter area.
(Your remote loopback is in the same area as your isdn link!)
Move the remote loopback into some other ospf area and you should be fine...
Larry Metzger wrote:
> Here's the configuration I used (different IP addresses, same idea)
> **
> Before adding dialer map without link failure .....
> r2#sh ip route
> 170.1.0.0/16 is variably subnetted, 4 subnets, 4 masks
> C 170.1.150.0/27 is directly connected, Serial0.1
> C 170.1.200.0/30 is directly connected, BRI0
> O IA 170.1.5.5/32 [110/65] via 170.1.150.5, 00:00:54, Serial0.1 <====
> O IA 170.1.100.0/24 [110/74] via 170.1.150.5, 00:00:54, Serial0.1
> --------------
> r5#sh ip route
> 170.1.0.0/16 is variably subnetted, 5 subnets, 4 masks
> C 170.1.150.0/27 is directly connected, Serial0.1
> C 170.1.200.1/32 is directly connected, BRI0
> C 170.1.200.0/30 is directly connected, BRI0
> C 170.1.5.0/24 is directly connected, Loopback0
> C 170.1.100.0/24 is directly connected, Ethernet0
> --------------
>
> Before adding dialer map with link failure .....
>
> r2#sh ip route
> 170.1.0.0/16 is variably subnetted, 3 subnets, 3 masks
> C 170.1.200.0/30 is directly connected, BRI0
> C 170.1.5.5/32 is directly connected, BRI0 <====
> O IA 170.1.100.0/24 [110/1572] via 170.1.200.2, 00:04:10, BRI0
> --------------
>
> Router 2 Configuration
> hostname r2
> !
> username r5 password 0 ipexpert
> !
> interface Serial0
> no ip address
> encapsulation frame-relay
> !
> interface Serial0.1 point-to-point
> ip address 170.1.150.2 255.255.255.224
> frame-relay interface-dlci 105
> !
> interface BRI0
> ip address 170.1.200.1 255.255.255.252
> encapsulation ppp
> dialer map ip 170.1.5.5 name r5 broadcast **11
> dialer map ip 170.1.200.2 name r5 broadcast **11
> dialer watch-group 1
> dialer-group 1
> isdn switch-type basic-net3
> ppp authentication chap
> !
> router ospf 100
> log-adjacency-changes
> network 170.1.150.0 0.0.0.31 area 345
> network 170.1.200.0 0.0.0.3 area 45
> !
> dialer watch-list 1 ip 170.1.5.5 255.255.255.255
> dialer-list 1 protocol ip deny
> !
> end
> -------------------
> Router 5 Configuration
> hostname r5
> !
> username r2 password 0 ipexpert
> !
> interface Loopback0
> ip address 170.1.5.5 255.255.255.0
> !
> interface Ethernet0
> ip address 170.1.100.5 255.255.255.0
> !
> interface Serial0
> no ip address
> encapsulation frame-relay
> !
> interface Serial0.1 point-to-point
> ip address 170.1.150.5 255.255.255.224
> frame-relay interface-dlci 501
> !
> interface BRI0
> ip address 170.1.200.2 255.255.255.252
> encapsulation ppp
> dialer map ip 170.1.200.1 name r2 broadcast
> dialer-group 1
> isdn switch-type basic-net3
> ppp authentication chap
> !
> router ospf 100
> log-adjacency-changes
> network 170.1.5.5 0.0.0.0 area 45
> network 170.1.100.0 0.0.0.255 area 0
> network 170.1.150.0 0.0.0.31 area 345
> network 170.1.200.0 0.0.0.3 area 45
> !
> dialer-list 1 protocol ip deny
> !
> end
> -----------------
> ************************************
> ************************************
> On R2 add to BRI0 interface
> dialer map ip 170.1.5.0 name r5 broadcast **11
>
> After adding dialer map with link failure
> r2#sh ip route
> 170.1.0.0/16 is variably subnetted, 3 subnets, 3 masks
> C 170.1.200.0/30 is directly connected, BRI0
> C 170.1.5.0/32 is directly connected, BRI0 <=======
> O IA 170.1.100.0/24 [110/1572] via 170.1.200.2, 00:00:08, BRI0
> ************************************
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Ronnie Higginbotham
> Sent: Tuesday, August 24, 2004 9:35 AM
> Cc: ccielab@groupstudy.com
> Subject: Re: more dialer watch woes
>
> Can you post your configs and routing tables. Host and remote router
> ----- Original Message -----
> From: "Larry Metzger" <larrymetzger@sbcglobal.net>
> To: "'Carlos G Mendioroz'" <tron@huapi.ba.ar>; "'marc van hoof'"
> <mvh@marcvanhoof.com>
> Cc: <ccielab@groupstudy.com>
> Sent: Tuesday, August 24, 2004 10:20 AM
> Subject: RE: more dialer watch woes
>
>
>
>>I worked on this and found if you put a second dialer map statement in
>>the system will work.
>>Dialer map ip 150.4.3.0 name remote-router broadcast 5555555
>>
>>The 150.4.3.0/32 route comes in as connected and allows everything to
>>work correctly.
>>
>>Larry
>>-----Original Message-----
>>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
>
> Of
>
>>Carlos G Mendioroz
>>Sent: Tuesday, August 24, 2004 4:49 AM
>>To: marc van hoof
>>Cc: ccielab@groupstudy.com
>>Subject: Re: more dialer watch woes
>>
>>Connected because it's in your BRI network ?
>>Why are you using that IP then, and not a remote loopback that will
>
> not
>
>>have this problem ?
>>
>>marc van hoof wrote:
>>
>>
>>>Dialer watch doesn't like me very much..
>>>
>>>Here's the current situation
>>>
>>>R4 is watching a /32 route that it is receiving via ospf.
>>>
>>>
>>>
>>>Dialer watch-list 1 ip 150.4.3.3
>>>
>>>Int bri 0/0
>>>
>>> Dialer watch-group 1
>>>
>>>So as a result of this, I need to have that route in a dialer map
>>
>>statement
>>
>>>Int bri 0/0
>>>
>>> Dialer map ip 150.4.3.3 name remote-router broadcast 5555555
>>>
>>>So when the route is up, everything is going well, and when it fails
>>
>>the
>>
>>>dialer watch kicks in and connects the isdn circuit.
>>>
>>>But then I get a connected host route via the bri interface:
>>>
>>>Rack4R4#show ip route 150.4.3.3
>>>
>>>Routing entry for 150.4.3.3/32
>>>
>>> Known via "connected", distance 0, metric 0 (connected, via
>>
>>interface)
>>
>>> Routing Descriptor Blocks:
>>> * directly connected, via BRI0/0
>>> Route metric is 0, traffic share count is 1
>>>
>>>Rack4R4#
>>>
>>>So when the ospf route reappears, it never makes it into the route
>>
>>table as
>>
>>>there is a lower administrative distance route in there already.
>>>Consequently, the dialer watch service never realizes the primary is
>>
>>back
>>
>>>up.
>>>
>>>Any help appreciated !!
>>>
>>>-marc.
>>>
>>>
>>
> _______________________________________________________________________
>
>>>Please help support GroupStudy by purchasing your study materials
>>
>>from:
>>
>>>http://shop.groupstudy.com
>>>
>>>Subscription information may be found at:
>>>http://www.groupstudy.com/list/CCIELab.html
>>>
>>
>>--
>>Carlos G Mendioroz <tron@huapi.ba.ar> LW7 EQI Argentina
>>
>>
>
> _______________________________________________________________________
>
>>Please help support GroupStudy by purchasing your study materials
>
> from:
>
>>http://shop.groupstudy.com
>>
>>Subscription information may be found at:
>>http://www.groupstudy.com/list/CCIELab.html
>>
>>
>
> _______________________________________________________________________
>
>>Please help support GroupStudy by purchasing your study materials
>
> from:
>
>>http://shop.groupstudy.com
>>
>>Subscription information may be found at:
>>http://www.groupstudy.com/list/CCIELab.html
>
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Carlos G Mendioroz <tron@huapi.ba.ar> LW7 EQI Argentina
This archive was generated by hypermail 2.1.4 : Fri Sep 03 2004 - 07:02:48 GMT-3