From: Carlos G Mendioroz (tron@huapi.ba.ar)
Date: Wed Aug 25 2004 - 07:49:40 GMT-3
Attenuation and gain are only available for analog ports in cisco boxes,
and it usually makes no sense to apply them on digital trunks.
But some PBXs do have the ability to apply loss plans to digital links,
so the answer seems to be ... it depends :-(
Shailen Amichand wrote:
> Hi,
>
>
>
> I need an answer to the following. I have a VoIP gateway with a PSTN
> connection and a Unified messaging device directly to the gateway, both are
> connected via E1/T1 to the same gateway. When a call flows from the PSTN
> directly to the UM device the call is TDM switched. Now what I need to know
> is whether input gain and output attenuation have any effect when a call is
> TDM switched?
>
>
>
> Any ideas??
>
>
>
> Thanks
>
> Shailen
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Carlos G Mendioroz <tron@huapi.ba.ar> LW7 EQI Argentina
This archive was generated by hypermail 2.1.4 : Fri Sep 03 2004 - 07:02:48 GMT-3