IE lab 15 task 4.7 - 4.9

From: ccie2be (ccie2be@nyc.rr.com)
Date: Wed Aug 18 2004 - 23:49:26 GMT-3

• Next message: thunai: "RE: ISIS & OSPF"
• Previous message: Malcolm Stewart: "Re: OT but "tx-ring-limit" do I need for QOS?"
• Next in thread: Brian Dennis: "RE: IE lab 15 task 4.7 - 4.9"
• Maybe reply: Brian Dennis: "RE: IE lab 15 task 4.7 - 4.9"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hey Brian,

I'm almost positive that the Solution Guide for the above task is wrong or
incomplete.

The task requires the use of the password CISCO but no where in the solution
guide is that password configured.

I checked the forum and there seems to be a lively discussion about this
problem.

But, I'd like to hear from you or the other brian what the definative answer
is.

What throws me is the specific requirement of task 4.9 - If any other device
(besides R4) challenges R5 it should respond with a hash that represents the
password UNKNOWN.

In other words, when R4 challenges R5, it should respond one way, but when a
different device challenges R5, it should respond in a different way.

I think this requirement crys out for an explanation form the gurus.

Thanks, Tim

• Next message: thunai: "RE: ISIS & OSPF"
• Previous message: Malcolm Stewart: "Re: OT but "tx-ring-limit" do I need for QOS?"
• Next in thread: Brian Dennis: "RE: IE lab 15 task 4.7 - 4.9"
• Maybe reply: Brian Dennis: "RE: IE lab 15 task 4.7 - 4.9"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Sep 03 2004 - 07:02:46 GMT-3