From: John Matus (jmatus@pacbell.net)
Date: Wed Aug 18 2004 - 21:30:05 GMT-3
i did 'no ip mroute cache' on the interface connected to a router that was 1
hope away and configured via auto-rp. now i'm seeing entries in the mroute
table but auto-rp is not configured (nada for sho ip pim rp mapp)
John D. Matus
MCSE, CCNP
Office: 818-782-2061
Cell: 818-430-8372
jmatus@pacbell.net
----- Original Message -----
From: "John Matus" <jmatus@pacbell.net>
To: "Richard Dumoulin" <richard.dumoulin@vanco.es>; "lab"
<ccielab@groupstudy.com>
Sent: Wednesday, August 18, 2004 5:24 PM
Subject: Re: rp trouble
> RE: rp troubleall set 'no ip mroute cache' and see what happens. debug
does
> not show rpf failures
>
>
>
> John D. Matus
> MCSE, CCNP
> Office: 818-782-2061
> Cell: 818-430-8372
> jmatus@pacbell.net
> ----- Original Message -----
> From: Richard Dumoulin
> To: John Matus ; lab
> Sent: Wednesday, August 18, 2004 5:21 PM
> Subject: RE: rp trouble
>
>
> Debug ip mpackets needs no ip moute-cache. Did you set this on the
incoming
> interfaces ?
> I bet your 2 hops away routers are suffering from "rpf failures" when
they
> receive the discovery messages from the MA,
>
> --Richard
>
> -----Original Message-----
> From: John Matus [mailto:jmatus@pacbell.net]
> Sent: jueves, 19 de agosto de 2004 1:52
> To: lab
> Subject: rp trouble
>
>
>
> i'm trying to use auto-rp on this network. all addresses are reachable,
> however only the directly connected neighbors are regestering the
rp....those
> that are 2 hops away don't see it at all.. any ideas? debug ip mpacket
shows
> nothing. the rp is set with 'ip pim send-rp-ann lo0 scope 16' and ip
> send-rp-disc lo0 scope 16
>
>
>
>
>
>
> John D. Matus
> MCSE, CCNP
> Office: 818-782-2061
> Cell: 818-430-8372
> jmatus@pacbell.net
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
> **********************************************************************
> Any opinions expressed in the email are those of the individual and not
> necessarily the company. This email and any files transmitted with it are
> confidential and solely for the use of the intended recipient. If you are
not
> the intended recipient or the person responsible for delivering it to the
> intended recipient, be advised that you have received this email in error
and
> that any dissemination, distribution, copying or use is strictly
prohibited.
>
> If you have received this email in error, or if you are concerned with
the
> content of this email please e-mail to: e-security.support@vanco.info
>
> The contents of an attachment to this e-mail may contain software
viruses
> which could damage your own computer system. While the sender has taken
every
> reasonable precaution to minimise this risk, we cannot accept liability
for
> any damage which you sustain as a result of software viruses. You should
carry
> out your own virus checks before opening any attachments to this e-mail.
> **********************************************************************
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Sep 03 2004 - 07:02:45 GMT-3