From: John Matus (jmatus@pacbell.net)
Date: Wed Aug 18 2004 - 21:11:48 GMT-3
from these second hop routers....if i do a 'ip pim rp-add' then i'm able to
get a response from the rp at the multicast address, but it would not
respond or register through auto-rp.....hmmm
any ideas?
John D. Matus
MCSE, CCNP
Office: 818-782-2061
Cell: 818-430-8372
jmatus@pacbell.net
----- Original Message -----
From: "John Matus" <jmatus@pacbell.net>
To: "lab" <ccielab@groupstudy.com>
Sent: Wednesday, August 18, 2004 4:52 PM
Subject: rp trouble
> i'm trying to use auto-rp on this network. all addresses are reachable,
> however only the directly connected neighbors are regestering the
rp....those
> that are 2 hops away don't see it at all..
> any ideas?
> debug ip mpacket shows nothing. the rp is set with 'ip pim send-rp-ann
lo0
> scope 16' and ip send-rp-disc lo0 scope 16
>
>
>
>
>
> John D. Matus
> MCSE, CCNP
> Office: 818-782-2061
> Cell: 818-430-8372
> jmatus@pacbell.net
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Sep 03 2004 - 07:02:45 GMT-3