From: Larry Metzger (larrymetzger@sbcglobal.net)
Date: Wed Aug 18 2004 - 02:39:16 GMT-3
You can not use 24:00. The system only goes to 23:59.
There is ambiguity if someone says to go from 6 AM to 7 AM then they
mean it should stop at 7:00:00 If you enter 06:59 the time ends at
7:00:00 (it will continue to run through 6:59:59).
Define 7:00 (do you mean 7:00:00 or 7:00:59).
Larry
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Swaroop Potdar
Sent: Tuesday, August 10, 2004 6:51 PM
To: Larry Metzger; Group Study
Subject: Re: Time Range
Hi,
The problem is not ambiguity....
When you use absolute under you defined time range...you can use maximum
till 23:59 as the end time.
And there is no such restriction as you have to use 17:59 for18:00 as
end
time.
And when you are using periodic under the time range.....you can very
well
use the 24:00hrs clock..specifying the exact start and end time.
HTH,
Swaroop.
----- Original Message -----
From: Larry Metzger <larrymetzger@sbcglobal.net>
To: Group Study <ccielab@groupstudy.com>
Sent: Tuesday, August 17, 2004 3:35 PM
Subject: Time Range
> I'm configuring a time range for an acl and have had two views on how
> the time works. The start time is simple enough, however the end time
> is a little odd. Even Cisco contradicts itself.
>
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/
> ffun_r/ffrprt3/frf012.htm#wp1026083
>
> If we want to go from 8 am to 6 pm. It should be 08:00 to 17:59 (this
> would get everything until 18:00, if we use 18:00 it will get
everything
> until 18:00:59). Just checking what the final answer should be on the
> exam. Everyone seems to flip flop on this. However, they do agree
that
> 23:59 goes till midnight.
>
> Anyone have a final answer???
>
> Larry
>
>
This archive was generated by hypermail 2.1.4 : Fri Sep 03 2004 - 07:02:45 GMT-3