From: Grant Stevenson (grant.h.stevenson@virgin.net)
Date: Tue Aug 17 2004 - 17:39:49 GMT-3
Hi Folks,
I have a contradiction from the doc cd and a book I have read (Cisco Field
Manual: Router Configuration by David Hucaby and Steve McQuerry)
Scenario:
Phone on R1 dial peer calls R2 and the phone is busy on R2, this is signalled
to R1, thus if this command [voice hunt user-busy] is configured on R1 then it
will look at the next voice peer to dial say R3, so long as the same
destination pattern is used.
I have read on the CD that this command must be entered to initiate the voice
hunt, the book contradicts this by saying that this command stops the routing
form voice hunting.
At the present time I do not have any voice equipment in my lab, and would
welcome any discourse in this configuration.
Regards
Grant H Stevenson
This archive was generated by hypermail 2.1.4 : Fri Sep 03 2004 - 07:02:45 GMT-3