Available bandwidth in virtual interface

From: Tasuka Amano Hsu (tasuka@mac.com)
Date: Tue Aug 17 2004 - 03:00:53 GMT-3

• Next message: Dean Penebacker: "CCIE lab day"
• Previous message: Tom Young: "switchport mode access command"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi,
When onfigure a isdn bri with dialer interface,
when I change the max-reserved-bandwidth 90,
I checnk the interface dialer will be 115K but bri0 still 96K,
which one is real active ?

R2
username R5 password cisco
!
interface BRI0
   bandwidth 128
   no ip address
   encapsulation ppp
   dialer pool-member 1
   isdn switch-type basic-ni
   isdn spid1 0332222011 3222201
   isdn spid2 0332222031 3222203
!
interface Dialer1
   ip address 10.1.1.2 255.255.255.0
   max-reserved-bandwidth 90
   encapsulation ppp
   dialer pool 1
   dialer string 3222202
   dialer load-threshold 1 either
   dialer-group 1
   no peer neigh-route
   no cdp enable
   ppp authentication chap
   ppp multilink
!
dialer-list 1 protocol ip permit
!

Sincerely,
Tasuka

• Next message: Dean Penebacker: "CCIE lab day"
• Previous message: Tom Young: "switchport mode access command"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Sep 03 2004 - 07:02:44 GMT-3