IPSO - RFC 1108

From: alsontra@hotmail.com
Date: Tue Aug 17 2004 - 02:26:49 GMT-3

Next message: Elliott Reyes: "ATM Back to Back"
Previous message: thunai: "Intersting RIP , OSPF & VPN Concentrator"
Next in thread: Joseph D. Phillips: "Re: IPSO - RFC 1108"
Maybe reply: Joseph D. Phillips: "Re: IPSO - RFC 1108"
Maybe reply: Howard C. Berkowitz: "Re: IPSO - RFC 1108"
Maybe reply: alsontra@hotmail.com: "Re: IPSO - RFC 1108"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Has anyone narrowed down the requirements for IPSO configuration in the R/S
lab? The documentation cd is a little lite and the RFC is far too much.
Specifically, I would like to know if anyone has considered what parts of IPSO
are relevant to the test? I am currently reviewing the following documents,
but would not mind any suggestions as to a better tutorial.

http://www.faqs.org/rfcs/rfc1108.html

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fsecu
r_c/fothersf/scfipso.htm

Thanks,
Alsontra

Next message: Elliott Reyes: "ATM Back to Back"
Previous message: thunai: "Intersting RIP , OSPF & VPN Concentrator"
Next in thread: Joseph D. Phillips: "Re: IPSO - RFC 1108"
Maybe reply: Joseph D. Phillips: "Re: IPSO - RFC 1108"
Maybe reply: Howard C. Berkowitz: "Re: IPSO - RFC 1108"
Maybe reply: alsontra@hotmail.com: "Re: IPSO - RFC 1108"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Sep 03 2004 - 07:02:44 GMT-3