Re: ISIS on ATM

From: undaunted@juno.com
Date: Sat Aug 14 2004 - 23:50:50 GMT-3

• Next message: alsontra@hotmail.com: "Re: Nat expandable via two ISPs, is it possible ?"
• Previous message: Jesse Loggins: "Re: DLSW+ over Frame"
• Maybe in reply to: marc van hoof: "ISIS on ATM"
• Next in thread: Brian McGahan: "RE: ISIS on ATM"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

ISIS .. there are two types of hellos messages
Serial and LAN Hellos ... you are experiencing hello types mismatches.. Here are some possible solutions

1. use the isis network point-to-point statement
2. set up a tunnel and run ISIS on the tunnel
3. set the interface to the same type on both sides of link.

Try it out ...

• Next message: alsontra@hotmail.com: "Re: Nat expandable via two ISPs, is it possible ?"
• Previous message: Jesse Loggins: "Re: DLSW+ over Frame"
• Maybe in reply to: marc van hoof: "ISIS on ATM"
• Next in thread: Brian McGahan: "RE: ISIS on ATM"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Sep 03 2004 - 07:02:44 GMT-3