From: ccie2be (ccie2be@nyc.rr.com)
Date: Thu Aug 12 2004 - 02:11:04 GMT-3
Hey Ty,
Good catch. In this new version of the documentation (20), you're right, it
is documented. This is different from previous versions of the documentation
(19).
Tim
----- Original Message -----
From: "Ty" <tycampbell@comcast.net>
To: "ccie2be" <ccie2be@nyc.rr.com>; <jongsoo.kim@intelsat.com>;
<ccielab@groupstudy.com>
Sent: Wednesday, August 11, 2004 8:45 PM
Subject: Re: RSPAN GOTCHA
> the remote-span vlan is documented with thre RSPAN
>
>
http://www.cisco.com/univercd/cc/td/doc/product/lan/c3550/12120ea2/3550scg/swspan.htm#wp1336427
>
> the remote span vlan needs to be created on both switches
>
> HTH :-)
> ----- Original Message -----
> From: "ccie2be" <ccie2be@nyc.rr.com>
> To: <jongsoo.kim@intelsat.com>; <ccielab@groupstudy.com>
> Sent: Wednesday, August 11, 2004 7:08 PM
> Subject: Re: RSPAN GOTCHA
>
>
> > Yes, although this isn't documented in the chapter on span and rspan.
> This
> > is documented in the chapter on VLAN's.
> >
> > I think the remote-span command has to be used on both switches but I'm
> not
> > 100% positive on this point.
> >
> > If the command should only be enabled on one switch, off-hand I couldn't
> > tell you which one - the source or destination switch.
> >
> > HTH, Tim
> > ----- Original Message -----
> > From: <jongsoo.kim@intelsat.com>
> > To: <ccielab@groupstudy.com>
> > Sent: Wednesday, August 11, 2004 7:40 PM
> > Subject: RSPAN
> >
> >
> > > See config and let's say all other basic config is done.
> > >
> > > SW1
> > > Sw1(config)# monitor session 1 source vlan 120 rx
> > > Sw1(config)# monitor session 1 destination remote vlan 100
> reflector-port
> > Fa0/23
> > > SW2
> > > Sw2(config)# monitor session 1 source remote vlan 100
> > > Sw2(config)# monitor session 1 destination interface Fa0/21
> > >
> > > To make the above config work, do I need add the below?( I think so
but
> my
> > solution doesn't show as it is a part of vlan database config)
> > > Sw1(config)# vlan 100
> > > Sw1(config-vlan)# remote-span
> > > Sw2(config)# vlan 100
> > > Sw2(config-vlan)# remote-span
> > >
> > >
This archive was generated by hypermail 2.1.4 : Fri Sep 03 2004 - 07:02:42 GMT-3