From: gladston@br.ibm.com
Date: Wed Aug 11 2004 - 15:53:02 GMT-3
Scott,
Thanks for the link.
Am I missing something or the command should be rtp instead tcp here:
!--- Sample output of show ip rtp header-compression command
maui-voip-sj#show ip tcp header-compression
TCP/IP header compression statistics: Interface Multilink1:
Rcvd: 10 total, 6 compressed, 0 errors
0 dropped, 0 buffer copies, 0 buffer failures
Sent: 10 total, 7 compressed,
230 bytes saved, 99 bytes sent
3.32 efficiency improvement factor
Connect: 16 rx slots, 16 tx slots,
2 long searches, 1 misses 0 collisions, 0 negative cache hits
90% hit ratio, five minute miss rate 0 misses/sec, 0 max
This archive was generated by hypermail 2.1.4 : Fri Sep 03 2004 - 07:02:41 GMT-3