From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Wed Aug 11 2004 - 11:32:58 GMT-3
Derek,
There is no default speed, it depends what it is clocked at.
The clocking can be provided locally via the "clock rate" command or on
the provider side at the CSU/DSU. The maximum rate that the interface
supports will be dependent on the hardware module.
If you are asking how to determine what the maximum speed is,
you have to check the hardware specs for the particular module on CCO.
HTH,
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Derek Gaff
> Sent: Wednesday, August 11, 2004 8:09 AM
> To: studygroup
> Subject: Serial T1 Speed
>
> Hi
>
> Anybody know were on the DOC CD you can find the default speed for
Serial
> Interfaces, such as the defaut speed for T1 and so forth.
>
> regards
>
>
This archive was generated by hypermail 2.1.4 : Fri Sep 03 2004 - 07:02:41 GMT-3